Some sizes may take around 10 days to dispatch.
The FC Series Filleteuse Tips are creasers like the F Series, but with a shorter and more compact tip, makes them easier to go around curves and crease smaller sections of leather.
The F Series Filleteuse Tips are creasers with two edges: the guide and the creaser. The guide is slightly longer than the creaser. The guide burnishes the side of the leather and gives you control while creasing a line on the top of the leather. These tips can create a 0.3 mm* (check the note in Specification) crease at various distances from the side of the leather.
They melt wax, paraffin or any other compounds for finishing leather surfaces.
Regad tips are made from high-quality, pre-treated steel. This range of steel complies with the NF Standard (French and European standards).
- Compatible with all Regad Creasing & Edging Machines and handles (1002, 1022, 1006, 1007)
- Recommended for straight lines
- Carefully polished before being fitted to the heat resistant body
Regad FC Series Filleteuse Compact Edge Creasing Tips
Length of Head only: 20 mm
Length of Full Tool: 65 mm
Width: 22 mm
Thickness: 1.5 mm - 6 mm
Made in France
F1C: 0.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F1.5C: 1.0 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F2C: 1.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F2.5C: 2.0 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F3C: 2.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F3.5C: 3.0 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F4C: 3.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F4.5C: 4.0 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F5C: 4.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F5.5C: 5.0 mm Distance from the edge of the leather – 0.3 mm Crease thickness
F6C: 5.5 mm Distance from the edge of the leather – 0.3 mm Crease thickness
*The F and FN series has 0.3 mm of crease thickness, it is measured when the iron is cold. The crease thickness can have some variations according to the leather and the temperature are chosen and pressure is exerted. The difference in crease thickness should not exceed 0.6mm even if the iron is heated.